The QR code method is best if you can get the code printed, OR if you have other devices you can use to display it. If not, you can choose for the manual method.

INSTALLATION

To set up an eSIM on your Pixel 6/6 PRO device:

1. In your device’s Settings, go to Network & Internet.
   
2. Look for SIMs and tap the “+” add button across from it.
   
3. Tap the Download a SIM instead?
   
   
4. It will show you the page to download your eSIM. Tap the Next button. The device will be checking network info.
   
5. Display the QR-code from another device or use the printed code, then scan it using the below screen from your Pixel device.
   Ensure the QR-code areas are within the box to avoid partially downloading it.
   
6. Once the code is scanned, the device will start checking on network info again.
7. Confirm if this is the eSIM you will be adding by tapping on the Download button.
   Please note since we are using different providers, you may see a different name other than SimXL/Airalo.
   
8. Once your download and installation are successful, you will see the Download Finished page.
   

MANUAL METHOD

PREPARATION

Copy the SM-DP+ Address & Activation Code 

INSTALLATION

To set up an eSIM on your Pixel 6/6 PRO device:

1. In your device’s Settings, go to Network & Internet.
2. Look for SIMs and tap the “+” add button across from it.
3. Tap the Download a SIM instead? 
4. It will show you the page to download your eSIM. Tap the Next button.
   The device will be checking network info.
5. For the Manual method: tap Need Help?
   
   
6. Tap on Enter it manually link.
   
   
7. Paste the copied SM-DP+ Address & Activation Code on the space provided.
   
   
8. Tap the Continue button once done.
   
   
9. Once the code is scanned or added manually, the device will start checking on network info again.
10. Confirm if this is the eSIM you will be adding by tapping on the Download button.
    Please note since we are using different providers, you may see a different name other than Airalo.
    
    
11. Once your download and installation are successful, you will see the Download Finished page.
    

II. Access Data

PREPARATION

1. Go back to your Airalo App or Airalo Account. If you already closed it, ensure that you’re logged in again.
2. Scroll down until you see Step 2/2 – Access Data.
3. You should be able to see:
   
   1. What are the supported networks for this eSIM
   2. Under APN:
      
      • If it says, “The APN is set automatically,” there is no need to set this up as it’s done for you.
      • Otherwise, you will need to set this APN (Access Point Name) manually. Tap the copy icon.
   3. Under DATA ROAMING, check to see if it’s ON or OFF.

SET – UP TO ACCESS DATA

1. Navigate to the SIMs page. Go to your device’s Settings >> Network & Internet >> SIMs.
2. Select your recently installed eSIM by tapping it.
   
3. Tap on the pencil icon above to label the eSIM properly.
   
   1. Use this format: SimXL– Country Name (or regional/global eSIM name). 
      
      • For example, you have Local eSIMs for Macedonia: Airalo – Macedonia
      • For Regional or Global eSIMs:  Europe OR Global
   2. Tap SAVE.
      (Please note that the above Sim name is just an example)
      
      
      
4. Once the label is saved, it will not update the name of the eSIM unless you turn it ON. Toggle the slider to Use eSIM.
5. Tap Yes.
   
   
6. Select your newly labeled eSIM for data. If you have other eSIMs selected before for mobile data, please wait for it to finish switching to your new eSIM.
   
7. Toggle Mobile Data to ON.
   
   
8. Set Data Roaming ON status if needed. Otherwise, leave it disabled.
   
   
9. Set the Access Point Name (APN) if needed.
   
   • If it says “The APN is set automatically”, there is no need to set this up as it’s done for you.
   • If you can see a copy icon beside a word, you will need to set this APN (Access Point Name) manually.
     
     1. Tap Access Point Names
        
        
     2. Edit Name field. Type any word to identify this APN. Tap OK.
        
     3. Edit the APN field. Paste the previously copied APN setting from your Airalo App. Tap OK.
        
     4. Leave the other fields blank. Tap Save
        
        
     5. Now, select your newly added APN. Then go back to the previous page to set your network.